TRIPLE HORIZONTAL HIVE AND THE QUEEN CELL HOLDING FRAME FOR QEEN BREEDING OR ROYAL JELLY PRODUCTION ASSEMBLED

This composed hive is mostly made with spruce and is divided into two pastoral broods on the sides and a standard Nuc hive in between.

The three compartments are separated by two removable plywood boards each with queen excluding grids at the bottom, and covered with inner covers with 4-way disc.

The screened anti-varroa bottom board is also divided accordingly, each of the compartments having its metal sheet tray, each compartment has a separate bee entrance, entrance reducer, frame spacers, and metal mesh frames with angle screws for the two exterior compartments.

The whole assembly also contains two metal handles and a wooden roof covered with metal sheet.

The Triple Hive can be used for queen bee fecundation but also the production of royal jelly.

Queen Cell holding Frame with top feeder.

The queen cell holding frame has the dimensions of a standard 1/1 frame, in the top end, it has a milled feeder coated wth parraffin, for fluid food and underneath it has 3 or 4 removable sticks that can hold 10-13 queen cells to obtain arond 50 queens at once.

This frame is compatible to be used with either the Jenter or the Nicot piking transfer system.

For the royal jelly production, the number of cells supported by each stick is considerably higher because there is no need for space between the cells.

The models have the following dimensions:

SS8010I - 622 x 1145 x 476 mm - 26.400 Kg/pc